Io Extender - Axis 2N LiftIP User Manual

2.8 IO Extender

Description
®
The IO extender helps you extend 2N LiftIP with 1 input and 2 outputs.
The purpose of the input is to cancel the rescue mode (if set in parameter 966 – 1 or
3). The input is N/O contact controlled .
®
The Blocking output closes if 2N LiftIP cannot set up an alarm call (due to absence of
proxy registration or no number in the Alarm button memory).
The User output is not used for the time being.
Connection
Connect the IO extender to the Extender connector (refer to Subs. 2.5). The Voice
Alarm Station (VAS) can also be connected to this connector.
2N TELEKOMUNIKACE a.s., www.2n.cz 43/117