Axis 2N LiftIP User Manual page 62

Par. Parameter
No. name
987 LED signalling
according to
EN 81-28
990 Enable
operational
calls at events
991 Service
password
992 Rescue
password
993 Enable
automatic
audio unit test
1100 Enable DHCP
client
2N TELEKOMUNIKACE a.s., www.2n.cz
Range of Default
values value
0–1 1
xxxxxxx 0000000
up to 16 digits: 12345
0–9
up to 16 digits: empty
0–9
0–1 0
0–1 1
Note
Yellow LED permanently on during an
Alarm Call.
Yellow and green LED flashing
alternately after an unsuccessful
checking call.
The value sets whether or not the
operational call shall be triggered at
events. Each digit enables (1) or
disables (0) calls at actions in the
following order:
Rescue end, Button stuck, Button
unstuck, Audio error, Audio fixed.
Do not use in combination with event
scripts!
Change the default programming
password for access to the
programming mode via a voice menu
and for full initialisation.
Set the rescue process terminating
password.
0 = disabled
1 = carry out an audio test of the
audio units after the check call.
The DHCP server assigns the
following to the devices via DHCP: IP
address , network mask , default
gateway and the address of the DNS
server .**
0 = disabled
1 = enabled
62/117