Axis 2N LiftIP User Manual page 32

Description of terminals and connectors
ETHERNET (PoE)
DC IN 10–30 V
terminal
ALARM Voltage
terminal control
Voltage
control
(inverted)
Contact
control
(N/O)
Contact
control (N
/C)
CANCEL Voltage
terminal control
Voltage
control
(inverted)
Contact
control
(N/O)
Contact
control (N
/C)
Extender (6-pin
connector)
2N TELEKOMUNIKACE a.s., www.2n.cz
RJ-45 LAN connector (PoE 802.3af)
External power
supply (unless PoE
is available)
5–48 V DC
connection
5–48 V DC
disconnection
N/O contact
N/C contact
5–48 V DC
connection
5–48 V DC
disconnection
N/O contact
N/C contact
Used for Voice Alarm Station connection.
DC 10–30 V 0.5 A
Use jumpers for configuration.
The jumper link is below the
ALARM terminal.
Voltage connection control: no
jumper mounted.
Voltage disconnection control:
right jumper mounted.
N/O contact: all jumpers
mounted.
N/C contact: left and middle
jumpers mounted.
Use jumpers for configuration.
The jumper link is above the
CANCEL terminal.
Voltage connection control: no
jumper mounted.
Voltage disconnection control:
right jumper mounted.
N/O contact: all jumpers
mounted.
N/C contact: left and middle
jumpers mounted.
32/117