Axis 2N LiftIP User Manual page 72

Caution
If the check call number is not completed (071–076), the call is set up to
the numbers in memories 011–016. We recommend you to set the check
call receiving number. If CPC/P100 were used and the call were directed
®
to 2N Lift8
The operational call can only be set up via CPC or P100. If the number is
not completed in memories 081–086, the call falls to the alarm numbers
if the CPC/P100 confirmation code is used. 2N
cannot evaluate such calls.
Warning
If the check call number is not completed, the call falls to the alarm
numbers but may not be confirmed and evaluated correctly.
If the operational call number is not completed, the call going to 2N
Lift8 Communicator
set the number that routes the call to the
evaluation and display in the 2N
Tip
Make sure that the alarm call number and check and operational call
numbers are different.
Useless Startup Protection
As the only purpose of
when the door is open is considered useless. Hence, connect the door contact if
available to the 2N
2N TELEKOMUNIKACE a.s., www.2n.cz
Communicator , the call would not be evaluated correctly.
will be evaluated as an alarm call. Thus, be sure to
®
2N LiftIP is to call help in case of emergency, any call made
®
LiftIP CANCEL input and program a connection establishing
®
®
2N Lift8 server
®
Lift8 Control Panel.
Lift8 Communicator
for proper
72/117
®