Axis 2N LiftIP User Manual page 107

Recording Settings
Find the Recording settings to the left. Select one of the available input devices in
Select source : integrated or external microphone or line input.
microphone input drive level.
capacity for a message to be saved into
message editing is displayed in the
Note
If the microphone input is overdriven during recording, turn down the
mic input gain. If the record is too silent, turn up the mic input.
In case the application gain setting is not sufficient, use system
controllers or an external amplifier.
Device
The Device menu provides information on the
parameters and firmware, bootloader and voice menu upgrade option.
Info
The Info menu provides basic information on the state of the device connected:
unit FW version, serial number, voice menu language and version.
parameter displays the current time read from the
parameter is not read online and has to be updated using the Read from device
parameter. Set time in device
calendar to set the date/time in hours manually. This value can be overwritten and
different time can be set for a different time zone. Click
setting. Click Save current time from PC to device
with your PC time value and load the new setting into the audio unit automatically.
The Password section helps you change the administrator password for the audio unit
connected. Enter the existing password into the
password into the New password. Click
the new setting.
2N TELEKOMUNIKACE a.s., www.2n.cz
Mic gain defines the input gain. The total memory
®
2N LiftIP
Time left parameter.
2N
helps you record a time setting of your own. Click on the
Save password to device
Mic level
is 30 seconds. The time left for
®
LiftIP audio unit connected: basic
The
®
2N LiftIP audio unit. This
Confirm to confirm the new
to synchronise the audio unit time
Current password
to confirm and save
defines the
audio
Time in device
and the new
107/117