Exerpeutic Momentum Bike Owner's Manual page 15

ASSEMBLY
Fig. A
Fig. B
STEP 5
5a. Remove two Knobs from the U bolt as shown in Fig. A.
5b. Fit the U bolt and Device Holder (88) around the Handlebar (7) tube with the Rubber Grips
facing the tube. Fully tighten the two Knobs to secure the Device holder (40). See Fig. B.
IMPORTANT: This Device Holder is not designed for outdoor use on intensively moving
bikes such as, mountain bikes. This is only designed to be used on this stationary workout
machine.
13