Exerpeutic Momentum Bike Owner's Manual page 12

TOOL:
13-15mm Wrench
1PC
Tip: Only turn the pedals in the direction instructed. The left and right pedals have different
turning directions for installation. The Cranks, Pedals, Pedal Shafts, Pedal Nuts, and Pedal
Straps are marked "R" for Right and "L" for Left.
Step 2
2a. Installing The Left Pedal Onto The Left Crank: Remove the Left Pedal Nut (55). Insert the
Left Pedal (12) perfectly straight into the threaded hole in the Left Crank (16). Turn the pedal shaft
by hand in a COUNTER-CLOCKWISE direction until snug. Use the 13 – 15mm Wrench to fully
tighten the Left Pedal (12). Attach the Left Pedal Nut (55) to the protruding shaft in a CLOCKWISE
direction. Use both the 13-15mm Wrench & 17-19mm Wrench to simultaneously tighten the Left
Pedal (12) and the Left Pedal Nut (55). Only tighten in the directions instructed.
2b. Installing The Right Pedal Onto The Right Crank: Remove the Right Pedal Nut (56) Insert
the Right Pedal (11) perfectly straight into the threaded hole in the Right Crank (15). Turn the
pedal shaft by hand in a CLOCKWISE direction until snug. Use the 13 – 15mm Wrench to fully
tighten the Right Pedal (11). Attach the Right Pedal Nut (56) to the protruding shaft in a
COUNTER-CLOCKWISE direction. Use both the 13-15mm Wrench & 17-19mm Wrench to
simultaneously tighten the Right Pedal (11) and the Right Pedal Nut (56). Only tighten in the
directions instructed.
ASSEMBLY
17-19mm Wrench
1PC
10
IMPORTANT:
Ensure that the Right Pedal
(11) matches up with the
Right Crank (15) and the Left
Pedal (12)
matches up with the Left
Crank (16). If reversed, the
cranks may become
damaged or stripped.