Hardware Requirements With Hp Vee - Agilent Technologies 4155B User Manual

Installation

Hardware Requirements with HP VEE

Hardware Requirements with HP VEE
The following hardware is required to use HP VEE and the VXIplug&play drivers.
• Controller
• 486/66 with Coprocessor (minimum recommendation)
• 586(Pentium)/90 or better is recommended.
• Memory
• For Windows 95: 16 Mbyte. 24 Mbyte or more is recommended.
• For Windows NT: 24 Mbyte. 32 Mbyte or more is recommended.
• Hard disk (minimum disk space)
• 20 Mbytes for HP VEE version 4.0
• 2 Mbytes for 4155B/4156B driver
• 1 Mbyte for E5250A driver
• Graphics
1024 × 768. 1280 × 1024 is recommended.
• IEEE 488 Interface card
Agilent 82341C GPIB Interface Card, or equivalent.
• CD-ROM drive
A CD-ROM drive will be required to install the software needed to use the
VXIplug&play driver.
• Flexible disk drive
A 3.5 inch flexible disk drive is required to install the drivers.
1-4 Agilent
4155B/4156B VXIplug&play Driver User's Guide, Edition 4