Main Controls; Figure 2 Flush Button; Figure 3 Heating Switch - Milnor MilTouch Operator's Manual

Main Controls

Master power switch (
you turn the master power switch off (
and the drain opens (unless your machine has the optional normally-closed drain).
When you return the master power switch to the on position (
again and asks if you want to resume the formula. Resumed formulas start at the beginning of the
step in which power was lost, but chemicals are not injected in the resumed step.
Touchscreen for the MilTouch™ controller — This is a touch-sensitive display screen that
you use for most machine functions.
Flush Button (Optional)
This optional button rinses the detergent box with cold water, to
manually flush dry chemicals into the machine. This button can
also be used to fill the machine with cold water, to increase the
water level in the machine.
Heating Switch (Optional)
This button selects the type of heating on machines with option-
al combined heating (steam and electric heaters).
E the machine uses the electric heater
S the machine uses the steam heater
Pellerin Milnor Corporation
) — This switch removes power from the control system. If
) while the machine runs a formula, the machine stops
), the controller powers up
Figure 2. Flush Button
Figure 3. Heating Switch
Controls
5