Milnor MilTouch Operator's Manual page 19

5. Open the inner door, as explained in
(s), page 9 .
6. Unload the goods from the open compartment.
7. Close the inner door, as explained in
(s), page 11 .
8. Close the outer door on the clean side. If your cylinder has only one compartment, skip to
Step 11.
9. Press the Reposition button (
side.
10. Repeat Steps 4–9 until you unload each compartment.
11. Press the Control on Soil Side button (
position. The green light on the soil side illuminates when the machine is ready to receive a
new load.
12. The outer door on the clean side automatically locks.
Pellerin Milnor Corporation
Section 3.2.1 : How to Open the Inner (Cylinder) Door
Section 3.2.2 : How to Close the Inner (Cylinder) Door
). The cylinder rotates to the next compartment on the clean
) to rotate the drum (cylinder) to the soil-side
Load and Unload
17