How To Close The Inner (Cylinder) Door(S); Safety And Best Practice When Loading And Unloading; Loading And Unloading Safety - Milnor MilTouch Operator's Manual

3.2.2

How to Close the Inner (Cylinder) Door(s)

1. Push the door to the closed position.
2. Push the lever (item C in
(Cylinder) Door Lock Mechanism, page 9
to the locked position until it clicks, as
shown.
3. Pull the handle in your direction to test the
lock. If the door does not open, it is fully
closed and locked.
BNWUUO02 / 2020115
3.3 Safety and Best Practice When Loading and
Unloading
If you are responsible to load and unload the machine:
• Put safety first.
• Use correct load sizes.
3.3.1

Loading and Unloading Safety

Loading and unloading activities have associated risks that are addressed by safety placards on
the machine. Before you use your Milnor
placards. If there is anything you do not understand, get clarification from your supervisor or
laundry management.
There can also be other risks associated with the type of laundry facility and the allied (non-Mil-
nor ® ) equipment you use, such as laundry carts, sling systems, chemicals and chemical systems.
Milnor ® advises you to obtain and read the safety literature provided for your facility and for all
equipment you use.
Examples of possible risks related to the type of laundry facility or to allied equipment are:
• goods handling:
– sharp objects such as scalpels and syringes left in OR gowns
– biological contamination in patient gowns and diapers
– just processed goods that are hot to the touch
– poisonous or flammable chemicals in the soiled goods
• laundry carts of the wrong size that cause unnecessary effort in loading or unloading
• laundering chemicals:
– leaks in supply lines
Pellerin Milnor Corporation
Figure 5: Inner
)
BNWUUO02
® washer-extractor for the first time, read the safety
BNWVUO01.T02 0000254675 B.2 3/11/20 4:59 PM Released
0000214782 C.2
BNWUUO02.C01 0000214781 B.2 C.2 B.4 1/2/20 2:19 PM Released
BNWUUO02.C03 0000214879 B.2 C.2 B.4 1/2/20 2:19 PM Released
Load and Unload
3/12/20 1:21 PM Released
11