Modify Water Level; Cancel A Formula; Figure 24 Pop-Up Controls For Water Level; Figure 25 Resume Or Cancel The Formula - Milnor MilTouch Operator's Manual

Troubleshooting
Close the window.

Modify Water Level

Figure 24. Pop-up Controls for Water Level
Increase the desired bath water level by 1 unit (centimeters or inches).
Decrease the desired bath water level by 1 unit (centimeters or inches).
Close the window.
5.1.4

Cancel a Formula

1. Touch on the Run display to cancel a formula.
2. A dialog box appears
to confirm your decision. On the dialog box, touch
to cancel the formula.
3. The controller disables all outputs, drains the bath
water through the normally-open drain valve (usually
the drain valve to the sewer), unlocks the door to the
washer-extractor, and returns to the Home display.
30
— Touch the box identified by item Lw on
(Figure 25 ) that prompts you
Figure 17
BNCLJB01.T01 0000204083 B.2 B.3 D.3 1/2/20 1:22 PM Released
Figure 25. Resume or Cancel the
Formula
.
Pellerin Milnor Corporation