How To Load The Machine With A Weighing System; Figure 6 Confirmation Dialogue Box - Milnor MilTouch Operator's Manual

Load and Unload
Figure 6. Confirmation Dialogue Box
9. Touch the button labeled Soil. The basket rotates so that you can access the next compartment
on the soil side.
WARNING: Contact with the turning cylinder — can crush your limbs
10. Repeat Steps 3–9 until you have loaded all the compartments.
11. When you have loaded all the compartments, close the outer door.
See Section 4.1 : How to Use the MilTouch™ Controller, page 18
wash formulas.
3.4.2

How to Load the Machine with a Weighing System

1. On the Home display, select a formula. If you are using a flow meter, select the formula that
your chemical supplier or laundry specialist set to use Liquor Ratio Control (see
4.1.1.1.1 : About the Liquor Ratio Control Feature, page 19
2. Touch . The Weighing System window appears (shown in the following figure).
14
Do not attempt to open the door or reach into the cylinder while it
�
rotates.
for instructions on how to run
BNCLKO05.T03 0000255623 B.2 C.6 B.5 3/12/20 10:51 AM Released
).
Section
Pellerin Milnor Corporation