Supplement; Technical Data - Vega VEGAWAVE 62 Operating Instructions Manual

9

Supplement

9.1

Technical data

Note for approved instruments
The technical data in the respective safety instructions are valid for approved instruments (e.g. with
Ex approval). These data can differ from the data listed herein - for example regarding the process
conditions or the voltage supply.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
Ʋ Process fitting - flange
Ʋ Process seal
Ʋ Seal (vibrating element)
Ʋ Tuning fork
Ʋ Suspension cable (-20 ... +80 °C/-
4 ... +176 °F)
Ʋ Suspension cable - optionally
(-40 ... +150 °C/-40 ... +302 °F)
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-cast housing
Ʋ Stainless steel housing (precision
casting)
Ʋ Stainless steel housing (electropol-
ished)
Ʋ Seal between housing and housing lid Silicone
Ʋ Light guide in housing cover (plastic)
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A)
Ʋ Pipe thread, conical (ASME B1.20.1)
Weight approx.
Ʋ Instrument weight (depending on
process fitting)
Ʋ Suspension cable (-20 ... +80 °C/-
4 ... +176 °F)
VEGAWAVE 62 • Two-wire 8/16 mA
316L
316L
Klingersil C-4400
CR, CSM
316L
PUR
FEP
Plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
316L
316L
PMMA (Makrolon)
316L
PA, stainless steel, brass
NBR
PA
G1½
1½ NPT
0.8 ... 4 kg (0.18 ... 8.82 lbs)
165 g/m (1.77 oz/ft)
9 Supplement
31