Vega VEGAWAVE 62 Operating Instructions Manual page 13

Mounting socket
Inflowing medium
Product flow
VEGAWAVE 62 • Two-wire 8/16 mA
The vibrating element should protrude into the vessel to avoid
buildup. For that reason, avoid using mounting bosses for flanges
and screwed fittings. This applies particularly to use with adhesive
products.
If VEGAWAVE 62 is mounted in the filling stream, unwanted false
measurement signals can be generated. For this reason, mount
VEGAWAVE 62 at a position in the vessel where no disturbances, e.g.
from filling openings, agitators, etc., can occur.
Fig. 5: Inflowing medium
To make sure the tuning fork of VEGAWAVE 62 generates as little
resistance as possible to product flow, mount the sensor so that the
surfaces are parallel to the product movement.
4 Mounting
13