Maintenance And Fault Rectification; Maintenance; Rectify Faults - Vega VEGAWAVE 62 Operating Instructions Manual

7 Maintenance and fault rectification

Maintenance

Cleaning
Reaction when malfunc-
tion occurs
Causes of malfunction
Fault rectification
24 hour service hotline
26
7 Maintenance and fault rectification
7.1 Maintenance
If the device is used properly, no special maintenance is required in
normal operation.
The cleaning helps that the type label and markings on the instrument
are visible.
Take note of the following:
•
Use only cleaning agents which do not corrode the housings, type
label and seals
•
Use only cleaning methods corresponding to the housing protec-
tion rating
7.2

Rectify faults

The operator of the system is responsible for taking suitable meas-
ures to rectify faults.
VEGAWAVE 62 offers maximum reliability. Nevertheless, faults can
occur during operation. These may be caused by the following, e.g.:
•
Sensor
•
Process
•
Voltage supply
•
Signal processing
The first measure to take is to check the output signal. In many cases,
the causes can be determined this way and the faults quickly rectified.
Should these measures not be successful, please call in urgent cases
the VEGA service hotline under the phone no. +49 1805 858550.
The hotline is manned 7 days a week round-the-clock. Since we offer
this service worldwide, the support is only available in the English
language. The service is free, only standard call charges are incurred.
VEGAWAVE 62 • Two-wire 8/16 mA