Supplement; Technical Data - Vega VEGAWAVE 63 Operating Instructions Manual

9 Supplement

9 Supplement
9.1

Technical data

Note for approved instruments
The technical data in the respective safety instructions which are included in delivery are valid for
approved instruments (e.g. with Ex approval). These data can differ from the data listed herein, for
example regarding the process conditions or the voltage supply.
All approval documents can be downloaded from our homepage.
General data
Material 316L corresponds to 1.4404 or 1.4435
Materials, wetted parts
Ʋ Process fitting - thread
Ʋ Process fitting - flange
Ʋ Process seal
Ʋ Tuning fork
Ʋ Extension tube ø 43 mm (1.7 in)
Materials, non-wetted parts
Ʋ Plastic housing
Ʋ Aluminium die-cast housing
Ʋ Stainless steel housing (precision
casting)
Ʋ Stainless steel housing (electropol-
ished)
Ʋ Seal between housing and housing lid Silicone
Ʋ Light guide in housing cover (plastic)
Ʋ Ground terminal
Ʋ Cable gland
Ʋ Sealing, cable gland
Ʋ Blind plug, cable gland
Process fittings
Ʋ Pipe thread, cylindrical (DIN 3852-A)
Ʋ Pipe thread, conical (ASME B1.20.1)
Weight approx.
Ʋ Instrument weight (depending on
process fitting)
Ʋ Extension tube
Sensor length (L)
Sensor lengths - accuracy
Max. lateral load
28
316L
316L
Klingersil C-4400
316L
316L
Plastic PBT (Polyester)
Aluminium die-casting AlSi10Mg, powder-coated (Basis:
Polyester)
316L
316L
PMMA (Makrolon)
316L
PA, stainless steel, brass
NBR
PA
G1½
1½ NPT
0.8 ... 4 kg (0.18 ... 8.82 lbs)
2000 g/m (21.5 oz/ft)
0.24 ... 6 m (0.787 ... 19.69 ft)
± 2 mm (± 0.079 in)
290 Nm, max. 600 N (214 lbf ft, max. 135 lbf)
VEGAWAVE 63 • Transistor (NPN/PNP)