Settings And Calibration; Sensor Settings; Program Settings - Seametrics PT2X Instructions Manual

SETTINGS AND CALIBRATION

Sensor Settings

Once connected you'll see the Sensor screen appear and
display the connected sensor(s) details. Mousing
icons will provide tool-tips, mouse over to view sensor
firmware and serial number details.
To change general sensor settings click
screen. This allows you to change the following:
Click to rename the sensor
To change Modbus address and/or Baud Rate simply select
the desired address and/or Baud Rate from the drop down
menus. Sensor will automatically reconnect at new address
and/or Baud Rate
To change the Direct Read output units (for direct Modbus
or SDI12 integration) simply select the desired output
units from the drop down menus. To change Aqua4plus
2.0 display units scaling see Program Settings.
Sensor Clock can be synced with your PC time or set
manually if desired. To set manually enter your desired
date/time and click Set Time.
When batteries are changed out make sure to reset the
battery information here, simply check the I have just put
in new batteries box and select the battery type that was
installed from the drop down menu.
Seametrics • 253.872.0284

Program Settings

To view/change Aqua4Plus 2.0 settings click
side-bar menu
over---
in the sensor
Under the General Settings tab you can change the default
data folder location. This is where your Reports are saved
to on your PC.
The Zoom Factor slider can be used to adjust the font size
within Aqua4plus 2.0.
Uncheck the Allow app to collect anonymous usage
statistics box if you would like to opt out. This information
is used to track Aqua4plus 2.0 reliability across different
system configurations.
Under the Display Units tab you can select your desired
display units for the supported channels. These may be
changed at any time and associated Real-Time readings and
Reports will rescale to the currently selected display unit. To
change Direct Read units scaling see Sensor Settings.
Page 11
PT2X INSTRUCTIONS
in the blue
seametrics.com