Mechanical Installation
1
Lifting holes for the filter
2
Lifting holes for the frequency converter
Illustration 3.8 Recommended Lifting Method, Frame Size F18
NOTICE
A spreader bar is also an acceptable way to lift the F-
frame.
NOTICE
The F18 pedestal is packaged separately and included in
the shipment. Mount the frequency converter on the
pedestal in its final location. The pedestal allows proper
airflow and cooling.
MG16I202
Operating Instructions
1
2
Danfoss A/S © Rev. 2014-07-29 All rights reserved.
3
3
19