Danfoss VLT HVAC Drive FC 102 Operating Instructions Manual page 46

Commissioning
1
2
A
4
6
B
5 5
7
10 C
On
15
Warn.
16
Alarm
17
D
18
Illustration 5.1 Local Control Panel (LCP)
A. Display Area
The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24 V DC supply.
The information displayed on the LCP can be customised
for user application. Select options in the Quick Menu
Q3-13 Display Settings.
Callout Display
1 1.1
2 1.2
3 1.3
4 2
5 3
Table 5.2 Legend to Illustration 5.1, Display Area
B. Display Menu Keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Callout
6 Status
7 Quick Menu Allows access to programming
44
Status 1(1)
0.0 % 0.00 A 0.00 kW
0.0Hz
2605 kWh
O Remote Stop
Quick Main Alarm
Status
Menu Menu Log
OK
Hand Auto
Reset
O
on on
19 20
Parameter number Default setting
0-20 Reference %
0-21 Motor current
0-22 Power [kW]
0-23 Frequency
0-24 kWh counter
Key Function
Shows operational information.
parameters for initial set-up instructions
and many detailed application
instructions.
Danfoss A/S © Rev. 2014-07-29 All rights reserved.
Operating Instructions
Callout
8
3
9
5
Table 5.3 Legend to Illustration 5.1, Display Menu Keys
C. Navigation Keys and Indicator Lights (LEDs)
Navigation keys are used for programming functions and
9
moving the display cursor. The navigation keys also
provide speed control in local (hand) operation. There are
also 3 frequency converter status indicator lights in this
area.
8
11
Callout
10
12
11
13
12
13
14
21
14
Table 5.4 Legend to Illustration 5.1, Navigation Keys
Callout
15
16
17
Table 5.5 Legend to Illustration 5.1, Indicator Lights (LEDs)
D. Operation Keys and Reset
Operation keys are located at the bottom of the LCP.
Key Function
Main Menu Allows access to all programming
parameters.
Alarm Log Displays a list of current warnings, the
last 10 alarms, and the maintenance log.
Key Function
Back Reverts to the previous step or list in the
menu structure.
Cancel Cancels the last change or command as
long as the display mode has not
changed.
Info Press for a definition of the function being
displayed.
Navigation Press to move between items in the
keys menu.
OK Press to access parameter groups or to
enable a choice.
Indicator Light Function
ON Green The ON light activates when the
frequency converter receives
power from mains voltage, a DC
bus terminal, or an external 24 V
supply.
WARN Yellow When a warning is issued, the
yellow WARN light comes on
and text appears in the display
area identifying the problem.
ALARM Red A fault condition causes the red
alarm light to flash and an alarm
text is displayed.
MG16I202