Waste Electrical And Electronic Equipment - Emerson AMS Wireless Vibration Monitor User Manual

User Guide
MHM-97927-PBF
North America:
CAN/CSA C22.2 No. 61010-1-12
UL Std. No. 61010-1 3rd Ed.
CAN/CSA C22.2 No. 60079-0 7th Ed.: 2019
UL 60079-0 7th Ed.: 2019
CAN/CSA C22.2 No. 60079-11 6th Ed.: 2014
UL 60079-11: 6th Ed.: 2013
CAN/CSA-C22.2 No. 60529 Ed. 2.2: 2016
ANSI/IEC 60529-2004 (R2011)
CAN/CSA-C22.2 No. 94.2-2007 (R2012)
UL 50E 2015
B.6

Waste Electrical and Electronic Equipment

Marking for the Waste of Electrical and Electronic Equipment in accordance with Article II
(2) of Directive 2012/19/EU (WEEE). The European Directive 2012/19/EU requires
marking:
• That applies to electrical and electronic equipment falling under Annex 1 Category 9 of
Directive 2012/19/EU.
• That serves to clearly identify the producer of the equipment and that the equipment
has been put on the market after 13 August 2005.
• That the crossed out wheeled bin alerts the end-user to dispose this equipment via the
special recycling procedure for electrical and electronic equipment that is applicable in
the country of use.
• The shown marking is attached to the product and identifies the product to fall within
the scope of this directive.
MHM-97927-PBF, Rev 1
Product certifications
August 2020
79