Task 31: Perform A Rescan - EMC VPLEX with GeoSynchrony 4.2 Installation And Setup Manual

Setting up a VPLEX Metro implementation
Task 31: Perform a
rescan
68 EMC VPLEX with GeoSynchrony 4.2 Installation and Setup Guide
11. Type the following commands to add the virtual volume(s) to the storage view:
cd /clusters/cluster-<Cluster_ID>/exports
storage-view addvirtualvolume -v <storage_view_name> -o
<virtual-volume_name>
12. Type the following commands to verify the status of the storage view:
cd /clusters/cluster-<Cluster_ID>/exports/storage-views
export storage-view summary
Output example:
View health summary(cluster-1):
view name health-state
----------- ------------
VMware_view healthy
view1 healthy
view2 healthy
view3 healthy
view4 healthy
Total 5 views, 0 unhealthy.
After provisioning and exporting storage, perform a rescan from the host to verify
that the exported virtual volume is visible.
exported volumes ports
---------------- -----
2
1311
10
11
10
registered
initiators
----------
4 4
4 480
4 2
4 2
4 2