EMC VPLEX with GeoSynchrony 4.2 Installation And Setup Manual page 67

Table of Contents

Advertisement

5. Type the following commands to create the RAID device:
6. Type the following commands to create the virtual volume:
7. Type the following command to list the initiator ports:
Name
------------
UNREGISTERED-0x10000000c866fff2
UNREGISTERED-0x10000000c866fff3
UNREGISTERED-0x10000000c866ffec
UNREGISTERED-0x10000000c866ffed
8. Type the following commands to register each initiator port:
9. Type the following commands to create and export the storage view:
10. Type the following commands to add each initiator port to the storage view:
cd /clusters/cluster-<Cluster_ID>/devices
local-device create <device_name> -g[raid-0|raid-1|raid-c] -e
<extent>,<extent>
cd /clusters/cluster-<Cluster_ID>/virtual-volumes
create -r <device_name>
ll /clusters/cluster-<Cluster_ID>/exports/initiator-ports
Output example (partial):
port-wwn
------------------
0x10000000c866fff2
0x10000000c866fff3
0x10000000c866ffec
0x10000000c866ffed
cd /clusters/cluster-<Cluster_ID>/exports/initiator-ports
export initiator-port register -i <initiator_port> -p
<portWWN|nodeWWN> -t <type>
where:
• <initiator_port> is the human readable name of the initiator port.
• <type> is the initiator type: hpux, sun-vcs, aix, or default.
cd /clusters/cluster-<Cluster_ID>/exports
storage-view create -c /clusters/cluster-<Cluster_ID>/ -n
<storage_view_name> -p <VPLEX_port>,<VPLEX_port>
cd /clusters/cluster-<Cluster_ID>/exports
storage-view addinitiatorport -v <storage_view_name> -i
<initiator_port>,<initiator_port>
Setting up a VPLEX Metro implementation
node-wwn
type
------------------ -------
0x20000000c866fff2 default
0x20000000c866fff3
default
0x20000000c866ffec
default
0x20000000c866ffed
default
VPLEX Metro setup procedure
Target Port Names
--------------------------
P000000003CA00165-A0-FC00,
P000000003CA00183-A0-FC00,
P000000003CB00165-B0-FC00,
P000000003CB00183-B0-FC00
P000000003CA00165-A0-FC01,
P000000003CA00183-A0-FC01,
P000000003CB00165-B0-FC01
P000000003CA00165-A1-FC00,
P000000003CA00183-A1-FC01,
P000000003CB00165-B1-FC00,
P000000003CB00183-B1-FC01
P000000003CA00165-A0-FC01,
P000000003CA00183-A1-FC00,
P000000003CB00165-B0-FC01,
P000000003CB00183-B0-FC01,
P000000003CB00183-B1-FC00
67

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPLEX with GeoSynchrony 4.2 and is the answer not in the manual?

Questions and answers

Table of Contents