Preprocessor Interface Hardware Reference Operating Characteristics; Table 6. Operating Characteristics - HP E2466C User Manual

Operating Characteristics
The following operating characteristics are not specifications, but are typical
operating characteristics for the preprocessor interface.

Table 6. Operating Characteristics

Intel Pentium II microprocessor
Microprocessor
Compatibility
S.E.C. Cartridge
Microprocessor
Package
66 MHz maximum for external BCLK
Clock Frequency
800 mV p-p minimum for all GTL+ signals
Target Signal
Amplitude
16550A (two-card module)
Logic Analyzers
16554A (three-card module)
Supported
16555A/D (three-card module)
16556A/D (three-card module)
None.
Accessories
Required
3 nS channel-to-channel skew (typical)
Timing Analysis
Supplied by the logic analyzer.
Power Requirements
Ten logic analyzer pods are required for transaction tracking.
Probes Required
Varies (see description on page 3-5).
Signal Line Loading
Preprocessor Interface for the Pentium II Processor
Preprocessor Interface Hardware Reference
Operating Characteristics
3-3