HP E2466C User Manual page 8

Preprocessor Problems A-5
Target system will not boot up A-5
Erratic trace measurements A-6
Capacitive loading A-6
Transaction Tracker/Inverse Assembler Problems A-7
No transaction tracking or incorrect transaction tracking A-7
Transaction tracker/inverse assembler will not load or run A-8
Transaction tracker/inverse assembler errors and warnings A-8
******** ******** (no data displayed in the transaction display) A-8
? (appears next to a disassembled instruction) A-8
<ia notice: long format requires Intel NDA> A-9
<ia notice: non-ReqA info requires Intel NDA> A-9
<pp error: h/w in timing mode or clk qual off> A-9
<pp error: sync lost -- reset target> A-9
<pp error: rcnt invalid -- reset target> A-9
<pp error: scnt invalid -- reset target> A-9
<ia error: BTM with target code read missing> A-9
<ia warning: too few states -- modes assumed> A-10
<ia warning: next BTM missing -- no disassembly> A-10
<ia warning: disassembly requires Branch Trace> A-10
<data ECC error: ... > A-10
Intermodule Measurement Problems A-11
An event wasn't captured by one of the modules A-11
Logic Analyzer Messages A-12
". . . Inverse Assembler Not Found" A-12
"Measurement Initialization Error" A-12
"No Configuration File Loaded" A-12
"Selected File is Incompatible" A-13
"Slow or Missing Clock" A-13
"Time from Arm Greater Than 41.93 ms" A-14
"Waiting for Trigger" A-14
Preprocessor Interface for the Pentium II Processor
Contents
vii