Table Of Contents - HP E2466C User Manual

Contents
1 Setting Up the Preprocessor Interface
Before You Begin 1-3
Setting Up the Preprocessor Interface Hardware 1-5
To select the operating mode 1-5
To disassemble the S.E.C. cartridge 1-7
To connect to the target system 1-9
To connect to the HP 16550A two-card analyzer 1-13
To connect to the HP 16554/55/56 analyzers 1-14
To power up or power down 1-15
To protect the preprocessor interface when not in use 1-15
Setting Up the Preprocessor Interface Software 1-16
To copy the HP 16500B/C logic analyzer files 1-17
To load the HP 16505A Prototype Analyzer files 1-18
To set up the preprocessor interface for timing 1-19
To connect to the APIC and JTAG signals 1-20
2 Analyzing the Intel Pentium II Processor
Displaying Information 2-3
To set up the HP 16505A workspace 2-3
To display the format specification 2-3
To display the configuration symbols 2-4
To display captured state information 2-8
To display captured timing data 2-9
Using the Transaction Tracker 2-10
Transaction Tracker Messages 2-12
Errors and warnings 2-12
Reaching boundaries 2-12
Protocol Violations 2-13
Preprocessor Interface for the Pentium II Processor v