To Display Captured State Information - HP E2466C User Manual

Displaying Information

To display captured state information

To display captured state information
The captured information is displayed in the Listing display.
•
Open the Listing display for your logic analyzer.
If your trace listing doesn't otherwise appear to be correct (capturing the
same RAM address twice, for example), make sure the preprocessor interface
hardware is configured for state analysis. See Chapter 1 to review the
hardware configuration, correct it if needed, and then run the trace again.
Figure 12 shows the Listing display for the HP 16550A logic analyzer.
Figure 12
Logic Analyzer Listing Display
2-8 Preprocessor Interface for the Pentium II Processor