Quadratec QuadraTop Adventure Top S Installation Manual page 8

S
2 Door Adventure Top
Figure 13
Place Right Hinge Plate (W) on top
of the door surround Front and Rear
Brackets and align the corresponding
Figure 15
Locate and remove original footman
loops using a T-25 torx socket.
(see FIG 15)
Installation:
T
W
T
holes. Insert the appropriate knobs
(T) to secure the plate. (See FIG 13)
Repeat this procedure for the Left Side.
Figure 16
Install the Front Section Latches (Z)
using the original hardware as shown.
(See FIG 16)
The Trusted Source
8
Z
®