Door Surround Assembly - Quadratec QuadraTop Adventure Top S Installation Manual

Door Surround Assembly

C Upright
Figure 1
Caution: Put on safety glasses. Join the
Left Hand Upright Lower Plastic (A) to
the Left Hand Upright (C), drill a pilot
hole using a / " bit and fasten with a
7
64
Self-Tapping Screw (G). (See FIG 1)
For other side, repeat to Join Right
Hand Upright Lower Plastic (B) to Right
Hand Upright (D) with Self-Tapping
I Bracket
Figure 3
Slide a Front Door Surround Bracket (I)
onto the Left Hand Front Door Bar (K).
(See FIG 3) For other side, slide the
Front Door Surround Bracket (I) onto
the Left Hand Front Door Bar (L).
G
A
Screw (G). Next, insert Left Hand Door
Bar and Corner Plastic (K) to the Left
Hand Upright (C) and secure the pieces
with an Upright Knob (H). Repeat to
Join the Right Hand Door Bar and
Corner Plastic (L) to Right Hand Upright
(D) and secure the pieces with the other
Upright Knob (H). (See FIG 2)
K
Insert the Left Hand Front Plastic (M)
fully into the Left Hand Front Door Bar
(K) as shown. (See FIG 4) Insert the
Right Hand Front Plastic (N) into Left
Hand Front Door Bar (L). (See FIG 4)
®
The Trusted Source
5
LH Door Bar Item K
H
(C)
Left
Figure 2
Upright
M
Figure 4
K