Quadratec QuadraTop Adventure Top S Installation Manual page 12

S
2 Door Adventure Top
Figure 29
If the top is centered, the reinforcement
slat should hang over the zippers on the
roll bar pads equally left and right as
shown above (see FIG 29).
Figure 31
Make sure plastic Side Window Corners
are NOT seated too far into their pock-
ets. This example shows how the Left
Side Window should appear.
(See FIG 31)
Installation:
Assemble Side Window Corners (EE &
FF) to each corner. Corner Convex faces
to the outside. Be sure to insert the cor-
responding left and right corner to their
appropriate window sides (See FIG 30)
✔
INCORRECT! This example shows the
Side Window Corner IMPROPERLY
seated too far into the pocket.
(See FIG 32)
THE RIGID PLASTIC INSERTS PREVENT THE TAILGATE BAR FROM
PUNCTURING THE TOP. IMPROPER INSTALLATION CAN CAUSE
THE TAILGATE BAR TO PUNCTURE THE WINDOW CORNERS.
The Trusted Source
12
EE
®
Figure 30
X
Figure 32