Top Retention Strap - Quadratec QuadraTop Adventure Top S Installation Manual

S
2 Door Adventure Top
Figure 49
Locate the unused hole on the back of
fold back base plate. (FIG49) Install the
Figure 51
Put the retention strap (part X) in place
with the bolt through the grommet as
shown. (FIG51) Next, install the 2nd
Figure 53
When the top is in the folded back posi-
tion reach up and hook the retention
strap over the bar as shown. (FIG53)
Installation: Top Retention Strap
Figure 50
supplied bolt and a washer through
the hole from underneath the base plate.
(FIG50)
Figure 52
washer and Nylock nut on top of the
strap and snug with a 13mm socket
wrench and 13mm wrench. (FIG52)
Figure 54
Make sure to unhook the retention strap
from the bar before folding the roof
forward again.
The Trusted Source
17
Strap installed in
driving position.
®