Quadratec QuadraTop Adventure Top S Installation Manual page 10

S
2 Door Adventure Top
Figure 21
Roll up the Soft Top Deck to make in-
stallation to the Flip Top Plates more
manageable. (see FIG 24)
Figure 23
Using the supplied 4mm Allen key,
install the Shoulder Bolts (BB) from the
outside of each Flip Top Header Assem-
bly knuckle and secure each bolt with
a lock Nut (CC). (see FIG 26)
Installation:
Figure 22
Place header assembly with soft top
onto vehicle and align with the hinge
plates. (see FIG 22)
Figure 24a
Figure 24b
Unscrew each Front Section Latch (Z)
where the latching hook just reaches
the header assembly. Pull the Flip Top
Header Assembly tightly against the
windshield to provide a proper tight
adjustment of the Front Section Latches.
(See FIG 24a) Secure the Front Section
Latches as shown. (See FIG 24b)
The Trusted Source
10
Z
Z
®