E+E Elektronik EE240 Series Manual page 2

USA
FCC information:
This equipment is tested and in compliance with all requirements for category B concerning part 15 of the FCC regulations. These requirements
have been set up to ensure an appropriate protection against EMC disturbances in residential areas. This equipment produces, consumes and
can radiate high frequency energy. If not installed and used in accordance with the information in this manual, the EE240 series can cause EMC
disturbance. There is no guarantee that EMC disturbance will not affect certain kinds of installations. If the equipment causes EMC disturbance
during radio and television reception (to be determined by switching the equipment on and off), then it is recommended to take the following
actions to eliminate the interference:
- Adjust or reposition the antenna
- Increase the distance between the receiving equipment and the wireless transmitter
- Connect the equipment to an outlet on a different circuit as that to which the receiver is connected
- Contact an experienced radio / TV technician
Caution:
Any changes or modifications made to the equipment, which are not carried out by a certified EMC technician may cause failure leading to
malfunctions.
CANADA
ICES-003 notification:
This equipment complies with the norm ICES-003, category B.