Dismantling Clutch Assembly - Husqvarna 545RXT AT Workshop Manual

Centrifugal clutch
8. Remove the vibration dampers. See figure 4.
9. Remove the 4 screws holding the clutch cover on the
engine. See figure 4.
10. Lift the engine body to the side so that the clutch
becomes accessible.

11.2 Dismantling clutch assembly

S/N: -191300901
Note! If the clutch hub is undamaged, this step is
not necessary
1. Remove cylinder according to "14.1 Dismantling the
cylinder and piston" on page 57
2. Use crank stop service tool to fix the crank shaft (A)
then unscrew the nut to remove the clutch (B). See
figure 5.
S/N: 191300901-
1. Remove the clutch from the crankshaft.
2. Replace the spark plug with piston stop.
3. Remove the clutch from the crankshaft.
Fig. 4
Fig. 5
A
B
English – 49