Removing The Carburettor From Engine Unit - Husqvarna 545RXT AT Workshop Manual

9.4 Removing the carburettor from
engine unit
1. Empty the fuel tank.
2. Loosen the screw on the starter and remove the
cover on the tank unit, cylinder cover. See figure 6.
3. Loosen the air filter cover. See figure 6.
4. Remove the 4 screws (See Service Data) holding
the filter frame. See figure 7.
5. Activate the start switch to make sure that it does not
get stuck when you remove the filter frame. See
figure 8.
6. Loosen the filter frame anti vibration elements from
the filter house. See figure 9.
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Carburettor
English – 31