Assembly - Husqvarna 325iR Operator's Manual

To assemble the handlebar
1. Remove the screw behind the throttle handle.
2. Move the throttle handle to the right side of the
handlebar.
3. Align the hole behind the throttle handle with the
hole in the handlebar.
4. Put the screw go through the holes. Tighten the
screw.
5. Attach the handlebar between the arrows on the
shaft. Tighten the screw.
To put the handlebar in transport
position
1. Loosen the knob.
1859 - 004 - 02.06.2023

Assembly

2. Turn the handlebar until it is parallel to the shaft.
3. Turn the handlebar around the shaft until the
handlebar clamp locks into transport position.
4. Tighten the knob.
To assemble the cutting equipment
The cutting equipment includes a cutting attachment and
a cutting attachment guard.
WARNING:
remove the battery. Use protective gloves.
Stop the product and
13