Husqvarna 545RXT AT Workshop Manual page 32

Carburettor
7. Disconnect the connector between the AutoTune
and ignition module and remove the clamps that hold
the filter on the filter housing. See figure 10.
8. Remove the 2 upper screws holding the air filter
housing. See figure 11.
9. Remove the housing assy and air valve. See figure
12, Pos A.
10. Remove the connecting rod from the carburettor.
See figure 12, Pos B.
11. Loosen the fuel hose on the air purge. See fig 13,
Pos A.
12. Disconnect the connector to the stop switch. See
figure 13, Pos B.
32 – English
Fig. 10
Fig. 11
A
Fig. 12
B
Fig. 13
B
A