8.5 Dismantling the generator
1. Disconnect the generator cable at the connection
point. See figure 5.
2. Unscrew the two screws and remove the generator.
See figure 6.
8.4 Replacing the drive dogs
1. Remove the bolts, the hooks and the springs.
2. Note the washer (A). See figure 7
3. Replace damaged parts.
4. Assemble in the opposite sequence.
5. Make sure that the recoil springs are in the correct
position. See figure 8.
6. Make sure that the hooks can turn freely when the
bolts are tight.
Ignition system and heated handles
Fig. 5
Fig. 6
Fig. 7
Fig. 8
English – 27