Irc-6 (Infrared Remote Control 6) Operation - Chauvet DJ Beamer 6 FX User Manual

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product. In DMX mode the IR will not function.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
Page 24 of 112
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
·
Press <AUTO> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> Laser/Strobe Only
o
<1> Laser/Strobe/Beam
o
<2> Beam Only
o
<3> Beam Only
o
<4> Laser Only
o
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
·
Press any number between <0> and <9> to choose your auto program.
<0> Laser/Strobe Only
o
<1> Laser/Strobe/Beam
o
<2> Beam Only
o
<3> Beam Only
o
<4> Laser Only
o
Speed Adjust
To adjust the speed of the auto program:
·
Press <SPEED> on the IRC-6.
·
Press <+> or <–> to increase or decrease, Auto program speed respectively.
Beam Head Color Modes
To set a specific color output for the Beam effects:
·
Press <R> for red.
·
Press <G> for green.
·
Press <B> for blue.
·
Press <W> for white.
Miscellaneous Operation
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
<5> Laser Only
o
<6> Strobe Only
o
<7> Strobe Only
o
<8> Beam/Laser Only
o
<9> Beam/Strobe Only
o
<5> Laser Only
o
<6> Strobe Only
o
<7> Strobe Only
o
<8> Beam/Laser Only
o
<9> Beam/Strobe Only
o
Beamer 6 FX User Manual Rev. 3