Irc-6 (Infrared Remote Control 6) Operation - Chauvet DJ Scorpion Bar RG User Manual

IRC-6 (Infrared Remote Control 6) Operation

Note: Make sure to point the IRC-6 directly at the receiver on the product. All other buttons have no function with this product.
Note: The IRC-6 will not respond to any inputs when Black Out is activated. If the remote does not respond when a button is
pressed, try pressing <BLACK OUT>. You may have inadvertently activated Black Out.
Page 24 of 110
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To navigate Big Automatic Show mode:
·
Press <AUTO> on the IRC-6. This will start the first auto show.
·
Pressing <AUTO> again will bring you to the next auto show.
·
Pressing <AUTO> once again will bring you to the last auto show.
·
Press any number between <1> and <9> to choose an auto program.
<0>
o
<1> Auto show 4
o
<2> Auto show 5
o
<3> Auto show 6
o
<4> Auto show 7
o
·
Press <+> or <–> to either increase or decrease the speed of the program.
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
·
Press <SOUND> on the IRC-6.
Speed Adjust
To adjust the speed of the auto program:
·
Press <SPEED> on the IRC-6.
·
Press <+> or <–> to increase or decrease, respectively
Miscellaneous Operation
To black out the lights:
·
Press <BLACK OUT> on the IRC-6. This will turn off all the lights until the button is pressed
again.
*
All other buttons have no function with this product.
<5> Auto show 8
o
<6> Auto show 9
o
<7> Auto show 10
o
<8> Auto show 11
o
<9> Auto show 12
o
Scorpion Bar RG User Manual Rev. 1.1