Irc-6 Infrared Remote Control - Chauvet DJ EZBeam Q3 ILS User Manual

IRC-6 Infrared Remote Control

The EZBeam Q3 ILS is compatible with the IRC-6 infrared remote control from Chauvet.
To enable or disable IRC-6 functionality, do the following:
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER>.
3. Press <UP> or <DOWN> to select from bAt (show battery power), ir (on to enable IR and oFF to
disable), or rSET (reset to factory settings).
4. Press <ENTER>.
Consult the table below to operate the EZBeam Q3 ILS with the IRC-6.
IRC-6
BLACK
AUTO SOUND
OUT
SENSI-
STROBE SPEED
TIVITY
%
MANUAL FADE
R G B
A UV W
-
+
0
1 2 3
4 5 6
7 8 9
<BLACK OUT>
• Any setting on the IRC-6 will be saved until the system is rebooted. The system will
revert to Auto Mode after reboot.
• The buttons on the IRC-6 not listed above are reserved for future use.
14
Button Function
Press to activate automatic mode, then press again to cycle
<AUTO>
programs
<SPEED> Press then use <+> or <-> to increase or decrease speed
Press to activate sound-active mode, then press again to select
<SOUND>
a program
<SENSITIVITY Press (once <SOUND> is selected) then use <+> or <-> to
increase or decrease sensitivity
Press to activate fade mode, then use <+> or <-> to select a
<FADE>
fading program
<MANUAL> Press to enable manual color control
<R> Press then use <+> or <-> to increase or decrease the red value
Press then use <+> or <-> to increase or decrease the green
<G>
value
Press then use <+> or <-> to increase or decrease the blue
<B>
value
Press then use <+> or <-> to increase or decrease the amber
<A>
value
<+> Press to increase speed, sensitivity, or color value
<-> Press to decrease speed, sensitivity, or color value
<0>–<9> Press to select a preset static color
Press to turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out
is activated. If the product does not respond when a button is
pressed, try pressing <BLACK OUT>. Black Out may have been
activated.
Operation
EZBeam Q3 ILS User Manual Rev. 1