Irc-6 Infrared Remote Control; Irc-6 Operation - Chauvet DJ IMIDATOR SPOT 160 User Manual

Operation

IRC-6 Infrared Remote Control

The Intimidator Spot 160 is compatible with the IRC-6 infrared remote control from Chauvet. To set the
Intimidator Spot 160 to IR mode, follow the instructions below:
1. Press <MENU>.
2. Use <UP> or <DOWN> to select Run Mode.
3. Press <ENTER>.
4. Press <UP> or <DOWN> to select IR.
5. Press <ENTER>.

IRC-6 Operation

The list below describes which features each button controls:
•
•
BLACK
AUTO SOUND
OUT
•
SENSI-
STROBE SPEED
TIVITY
•
%
MANUAL
FADE
•
R G B
•
A UV W
-
+
0
•
•
1 2 3
•
4 5 6
•
7 8 9
•
•
•
•
•
•
•
•
Intimidator Spot 160 User Manual Rev. 2
<BLACKOUT> - Keeps shutter closed.
<AUTO> - Activates Auto mode. Use <+>, <->, or <0>–<9> to select an auto
program.
<SOUND> - Activates Sound mode.
<STROBE> - Activates Strobe control. Use <+> or <-> to increase or decrease
the strobe speed from 00 (off) to 13, or from 14–20 for a pulse strobe.
<SPEED> - Sets Pan/Tilt Speed. Use <+> or <-> to increase or decrease the
pan/tilt speed from 000 (fastest) to 255 (slowest)
<SENSITIVITY> - Sets Sound Sensitivity. Use <+> or <-> to increase or
decrease the sensitivity from 001 (lowest) to 100 (highest)
<%> - Sets Dimmer value. Use <+> or <-> to widen or narrow the shutter.
<MANUAL> - Cycles through static gobos.
<FADE> - Cycles through static colors.
<R> - Sets color wheel rotation speed. Use <+> or <-> to increase or decrease
the speed from 000 (slowest) to 100 (fastest). Press <R> to toggle direction.
<G> - Sets gobo wheel rotation speed. Use <+> or <-> to increase or decrease
the speed from 000 (slowest) to 100 (fastest). Press <G> to toggle direction.
<B> - Activates Auto Color/Gobo mode.
<A> - Sets manual Pan/Tilt values. Press <A> to toggle between pan and tilt.
Use <+> or <-> to increase or decrease the pan/tilt value, from 000–255.
<UV>/<P> - sets manual Zoom and Focus values. Press <UV>/<P> to toggle
between zoom and focus. Use <+> or <-> to increase or decrease the zoom/
focus value, from 000–255.
<W> - Sets manual Prism values. Use <+> or <-> to increase or decrease the
prism value, from 000–255.
<+> - Increases a value when in a function.
<-> - Decreases a value when in a function.
<0>–<9> - Selects Auto programs 0–9.
Page 15 of 20