Table of Contents
Advertisement
Operation
IRC-6 Infrared Remote Control
The EZLink Par Q6BT ILS can be operated with the CHAUVET IRC-6. To enable IR wireless control,
follow the instructions below.
1. Press <MENU> repeatedly until SEt shows on the display.
2. Press <ENTER>.
3. Press <UP> repeatedly until ir shows on the display.
4. Press <ENTER>.
5. Press <UP> repeatedly until ON shows on the display
IRC-6 Operation
Automatic Mode
To turn on Automatic mode with the IRC-6:
BLACK
AUTO
SOUND
OUT
Sound-Active Mode
SENSI-
STROBE
SPEED
TIVITY
To turn on Sound-Active mode with the IRC-6:
%
MANUAL
FADE
R
G
B
To adjust the sound sensitivity:
A
UV
W
-
+
0
Strobe
1
2
3
To turn on Strobe mode with the IRC-6:
4
5
6
7
8
9
Manual Control
To manually select the laser color with the IRC-6:
To manually select the laser pattern with the IRC-6:
Black Out
To black out the lights with the IRC-6:
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing <BLACK OUT>.
Black Out may have been activated.
•
Any setting on the IRC-6 will be saved until the system is rebooted. The system will
revert to Auto Mode after reboot.
•
The buttons on the IRC-6 not listed above are reserved for future use.
Bluetooth Control
Bluetooth control mode allows users to control one or more EZLink Par Q6BT ILS products via Bluetooth
connection on the BTAir app.
To operate the product via Bluetooth control mode:
1. Press <MENU> repeatedly until bLE shows on the display.
2. Press <ENTER>.
3. Use the ID number on the display to identify the product on the BTAir app.
•
Ensure that all products are set to Bluetooth control mode prior to operating the
BTAir app, as failure to do so may require restarting the app.
•
For further instructions on how to pair and operate products with the BTAir app,
download the BTAir User Manual from www.chauvetdj.com.
EZLink Par Q6BT ILS User Manual Rev. 1
1. Press <AUTO> on the IRC-6.
2. Press <+> or <–> to change program.
1. Press <SOUND> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sensitivity.
1. Press <SENSITIVITY> on the IRC-6.
2. Press <+> or <–> to increase or decrease the sensitivity.
1. Press <STROBE> on the IRC-6.
2. Press <+> or <–> to increase or decrease the strobe speed.
1.
Press the desired color, from <R> (red), <G> (green), <B> (blue), or <A> (amber).
1. Select a manual color.
2. Press <+> or <–> to cycle through the patterns.
1. Press <BLACK OUT> on the IRC-6.
11
Advertisement
Table of Contents
