Setting Of The Eep Profile; Changing The Eep Profile; Teaching In Of The Gateway - oventrop R-Tronic RTF B Operating Instructions Manual

Operation
7.3

Setting of the EEP profile

Ensure that your gateway is compatible with the EnOcean Equipment Profile
(EEP).
During initial commissioning, adjust the settings as follows to set the desired
EEP:
A5-10-02 A5-10-03
A5-10-23 A5-10-12
Deutsch / Deutsch /
English / English /
Francais Francais
Fan Fan
YES NO
Room occu- Special
pancy function
YES NO
Room occu-
pancy
NO
f The selected EEP now appears on the display and is activated.
You can find out which EEP profile you activated via the "INFORMA-
TION" menu option.
7.4

Changing the EEP profile

If you want to change the EEP profile or if you mistakenly activated the
wrong profile, you must set the thermostat back to its factory settings. A dif-
ferent profile or the correct profile can then be activated during reinstallation.
7.5

Teaching in of the gateway

Activation of the EEP profile does not establish an automatic communication
link to the gateway. A link is established once a so-called send telegram is
sent via the "R-Tronic". Once the gateway receives this telegram, the teach
in process for the wireless thermostat begins.
The gateway must support each of the EEP profiles activated on
the "R-Tronic", i.e. it must be able to control the corresponding
function. If this is not the case, the "teach in" process will fail.
To send the teach in telegram to the gateway, proceed as follows:
34
A5-10-04 A5-10-06
A5-10-22 A5-10-11
Deutsch / Deutsch /
English / English /
Francais Francais
Fan Fan
YES NO
Room occu- Special
pancy function
NO NO
Room occu-
pancy
YES
R-Tronic
A5-10-06 +
RPS
A5-10-11 +
RPS
Deutsch /
English /
Francais
Fan
NO
Special function
YES
115078080-V01.10.2019