Nominal Value Setting; Room Occupancy Setting; Menu Lock Setting - oventrop R-Tronic RTF B Operating Instructions Manual

R-Tronic
1. Navigate to the main menu (refer to 7.1 on page 32).
2. Select the SETTINGS menu option.
3. Select the INSTALLATION menu option.
4. Press the menu button. TEACH IN appears on the display.
5. Press the menu button to complete the "teach in" process.
f TELEGRAM SENT appears on the display and a radio symbol is dis-
played.
If the "teach in" process on a "R-Con FBH" wireless receiver was
successful, you must then enter the date and time.
7.6

Nominal value setting

1. Press the menu button.
2. Turn the menu button clockwise to increase the temperature. Turn the
menu button anticlockwise to decrease the temperature.
3. Press the menu button to save the entry.
7.7

Room occupancy setting

If the A5-10-02, A5-10-06, A5-10-06 + RPS, A5-10-11, A5-10-11 + RPS, or
A5-10-23 EEP profile was activated during commissioning, the "Room occu-
pied" function is available on "R-Tronic". This can be switched on when the
room is occupied and switched off when exiting the room. You can switch
the setting in the display menu from "Present" to "Absent" and vice versa by
pressing the menu button twice.
7.8

Menu lock setting

Once the teach in process has been completed, the menu lock is automati-
cally activated and the
gate to the main menu when the menu lock is activated (7.1 on page 32).
You can still adjust the nominal value, the occupancy and vacancy
settings of the room occupancy as well as the fan speeds when the
menu lock is activated.
Press and hold the (+) and (-) buttons for at least 3 seconds to release the
menu lock.
115078080-V01.10.2019
"padlock" symbol appears. It is not possible to navi-
Operation
35