Extron electronics TouchLink TLI Pro 201 User Manual page 21

If DHCP is off, set the unit IP Address, Subnet Mask, Gateway address, and DNS
3.
Primary address.
Press the button for the address to be edited. A dialog box opens, showing the
a.
address and a numerical keypad.
IP Address
1 9 2 1 6 8 2 5 4
1 2
4 5
7 8
0
Back
Figure 9. Numeric Pad for Setting IP Addresses
Enter the 3-digit value for that octet (leading zeroes in the octet are ignored).
b.
NOTES:
Octets can have any value between 0 and 255.
•
If you attempt to enter an invalid number, for example 892, you are able
•
to enter the 89 but the 2 cannot be entered.
When a valid three-digit value is entered, the next octet is automatically
•
selected.
OK to save the changes and return to the Network screen, or press Cancel to
Press
c.
Network screen without saving the changes.
return to the
If you have changed any of the values
4.
in the Network screen, the background
color of the address button changes to
blue (see figure 10).
Press Apply to apply the new values or
5.
press Revert to return to the previous
values without saving the changes. The
address button returns to gray.
If you have not made any changes, the
Apply and Revert buttons are grayed
out and do not function.
Clear
2 5 1
3
6
9
OK
Cancel
Unsaved
Saved
Figure 10.
TLI Pro 201 • On-screen Menus
0.0.0.10
0.0.0.10
IP Address, unsaved (top)
and saved (bottom).
13