Power Board - GRAPHTEC CS500 Series Service Manual

8.21 Power Board

Detaching the power board
(1) Detach the right and left side covers (see Sections 8.1 and 8.2).
(2) Detach the front guide assembly (see Section 8.4).
(3) Remove the six M3L6 binding head screws holding the power board.
(4) Disconnect all the connectors on the power board.
(5) Detach the power board from the unit.
Reattaching the power board
(1) Reattach the power board in the reverse order in which it was detached.
Prepare corresponded the power board before replacing the power board.
If the model name is CS500-11 or IS200-11 use the power board for the CS500-11 or IS200-11.
If the model name is CS500-11-A or IS200-11-A use the power board for the CS500-11-A or IS200-11-A.
CS500/IS200-UM-251-9370
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
M3L6 binding head screw
8-23