GRAPHTEC CS500 Series Service Manual page 61

Detaching the front pinch roller cover
(1) Remove the four M3L8 binding head screws and the bushes holding the front pinch roller cover.
(2) Loosen the two M3L6 binding head screws holding the front pinch roller cover holding bracket.
(3) Slide the front pinch roller cover holding bracket to the left and then detach the front pinch roller cover.
Reattaching the pinch roller covers
(1) Reattach the pinch roller covers in the reverse order in which they were detached.
CS500/IS200-UM-251-9370
8. DISASSEMBLING AND ADJUSTING THE MECHANICAL PARTS
M3L8 binding head screw
Loosen the two M3L8 binding head screws.
8-17
Slide the front pinch roller
cover holding bracket to
the left.