Starting Engine; (Vehicle With Keyless Push Start System) - Suzuki Baleno Manual

Caution when stopping the engine with
turbocharger
When stopping the engine after climbing or
high speed driving, let the engine idle for
about one minute or more (if it is not pro-
hibited) to cool down the turbocharger and
engine oil. This is to prevent the engine oil
from over-deteriorating. Deteriorated
engine oil will damage the bearings of the
turbocharger.

Starting engine

(vehicle with keyless push
start system)
Before starting engine
MT
AT
CVT
68PM00304
1) Check that the parking brake is set fully.
2) Manual transaxle – Shift to "N" (Neutral)
and fully depress the clutch pedal. Hold
the clutch and brake pedals fully
depressed.
Automatic transaxle or CVT – If the
gearshift lever is not in "P" (Park) posi-
tion, shift it to "P". Hold the brake pedal
fully depressed.
OPERATING YOUR VEHICLE
(1)
3) The "PUSH START SWITCH" message
will appear on the information display in
the instrument cluster. Push the engine
switch (1). When the engine is started,
the starter motor will automatically stop.
WARNING
Check that the parking brake is set
fully and the transaxle is in Neutral
(or Park for vehicles with an auto-
matic transaxle or CVT) before
attempting to start the engine.
68PM2-01E
82K254
3-14