Suzuki Baleno Manual page 82

Hide thumbs Also See for Baleno:
Table of Contents

Advertisement

BEFORE DRIVING
EXAMPLE
(A) (E)
(B)
(D)
(C)
(3)
68PM00249
(3) Information display
When the ignition switch is in "ON" posi-
tion, the information display shows the fol-
lowing information.
Display (A)
Clock
Display (B)
Fuel gauge
Display (C)
Trip meter / Odometer / Fuel consumption /
Driving range / Oil indicator
Display (D)
Gearshift indicator
Display (E)
Thermometer
2-63
Clock
When the ignition switch is in "ON" posi-
tion, the display (A) shows the time.
To change the time indication:
1) Push the trip meter selector knob (1)
and the indicator selector knob (2)
together.
2) To change the hour indication, turn the
indicator selector knob (2) left or right
repeatedly when the hour indication
blinks. To change the hour indication
quickly, turn and hold the indicator
selector knob (2). To set the hour indi-
cation, push the indicator selector knob
(2) and the minute indication will blink.
3) To change the minute indication, turn
the indicator selector knob (2) left or
right repeatedly when the minute indi-
cation blinks. To change the minute
indication quickly, turn and hold the
indicator selector knob (2). To set the
minute indication, push the indicator
selector knob (2).
WARNING
If you attempt to adjust the display
while driving, you could lose control
of the vehicle.
Do not attempt to adjust the display
while driving.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the clock indication will
be reinitialized. Change the indication
again to your preference.
Fuel gauge
When the ignition switch is in "ON" posi-
tion, the display (B) shows the fuel gauge.
Refer to "Fuel gauge" in this section.
Trip meter / Odometer / Fuel con-
sumption / Driving range / Oil indi-
cator
When the ignition switch is in "ON" posi-
tion, the display (C) shows one of the fol-
lowing indications, trip meter A, trip meter
B, odometer, instantaneous fuel consump-
tion, average fuel consumption, driving
range or oil indicator.
To switch the display indication (C), push
the trip meter selector knob (1) or the indi-
cator selector knob (2) quickly.
68PM2-01E

Advertisement

Table of Contents
loading

Table of Contents